Pelvic Traction Belt
-
Size
The Tynor Pelvic Traction Belt G 06 is a traction halter that holds the pelvic area and directs traction to the sacral, lumbar and thoracic regions of the spine. Its technical design ensures the maximum traction effect is felt at the spine rather than the lateral sides of the pelvis, while strong slings on each side attach to a spreader bar, traction pulley bracket and weights. A broad hook-and-loop area gives customised compression and flexible sizing for convenient use at home or in hospital. Supplied by Australian Healthcare Supplies, a registered NDIS provider based in Perth, Western Australia.
Features
- Three-layered PU-bonded fabric with soft skin-contact layers and a cushioning middle PUF layer for a plush, wrinkle-free feel.
- Large hook-and-loop area provides customised compression and flexibility in sizing.
- Oblique traction straps direct the vector of traction force onto the lumbosacral vertebrae.
- Strong side slings couple conveniently with a spreader bar and traction pulley system.
- Sturdy design built for long life and repeated use.
- Suitable for convenient use at home or in hospital.
Intended Use
May assist in managing discomfort associated with the following conditions:
- Lumbar spondylitis
- Intervertebral disc syndrome
- Trial management of nerve root compression
- Sciatica nerve decompression
- Low back ache and postural fatigue
- Postural deformities and mechanical stress due to poor posture
- Stabilisation during vertebral fractures or injuries
How to Use
- Wrap the belt around the pelvic portion with the traction straps on the underside.
- Hook the traction straps to the pelvic traction spreader bar and traction pulley bracket.
- The spreader bar balances the traction force equally on both sides of the body.
- Use a hard, smooth bed and apply traction only under the direction of a qualified expert.
What's in the Box
- Pelvic Traction Belt (with side traction slings)
Note: the spreader bar, traction pulley bracket, cord and weights that make up a complete pelvic traction kit are supplied separately.
Product Care
- Close the hook-and-loop closures before washing.
- Hand wash the fabric with mild detergent in water below 30°C without wringing. Dry in shade on a flat surface.
- Do not dry-clean, iron or bleach.
Important Cautions
- This equipment should be used only under the strict guidance and vigil of a qualified doctor.
- Discontinue use and seek medical advice in case of impaired sensation, impaired blood flow, allergy, rash or itching, or if pain increases or persists.
- Consult your doctor in case of concurrent use of another medical device.
- The weight of traction and counter-traction should be carefully calculated by a qualified expert, with careful monitoring for adverse symptoms throughout.
- Misuse or improper use of the device can lead to adverse effects and decreased effectiveness.
- Keep out of reach of children.
- Please check with your doctor, physiotherapist, or healthcare professional to confirm this product is suitable for your condition and correct sizing.
Common Questions
Is a complete kit included?
This listing is for the pelvic traction belt. The spreader bar, pulley bracket, cord and weights are used with it and supplied separately.
How do I choose a size?
Measure the circumference approximately 3 inches below the navel and select from Small, Medium, Large or Extra Large.
Where is the traction force felt?
The design directs the force to the spine rather than the lateral sides of the pelvis, focusing the effect on the lumbosacral region.
Does it need professional supervision?
Yes. Pelvic traction should be set up and applied only under the guidance of a qualified doctor.
Regulatory & Supply Details
- Product Code: G 06
- Sizes Available: Small, Medium, Large, Extra Large
- Device Classification: Class I Medical Device
- Certifications: ISO 9001 · ISO 13485 · ISO 45001 · US FDA Registered · CE Marked · W.H.O. GMP
- Materials: Polyamide, Polyester, PU
- Manufacturer: Tynor Orthotics Pvt. Ltd.
- EC Representative: MT Promedt Consulting GmbH, Altenhofstrasse 80, D-66386 St. Ingbert, Germany
- Australian Supplier: Australian Healthcare Supplies, Perth WA — registered NDIS provider
- Bulk & wholesale orders: sales@tynor.com.au